That old stump in your yard is not just an eyesore — it is a magnet for termites, a tripping hazard for your family, and a dead zone where you cannot mow, plant, or build. Our stump grinding service eliminates stumps below ground level in under an hour, leaving your yard clean, level, and ready for whatever you want to do with the space. No digging, no chemicals, no mess.
Tell us how many stumps you have and their approximate size — we will get back to you fast.
Stump grinding is the fastest, most practical method for removing tree stumps from residential and commercial properties without excavation or heavy digging.
A stump grinder is a heavy-duty machine with a rotating carbide-tipped cutting wheel that chews through wood and roots at the surface level. We position the grinder directly over the stump and systematically work across the entire diameter, grinding the wood into small chips. The wheel cuts 6 to 12 inches below grade — deep enough for new sod, planting, or any landscape feature you want in that spot.
Unlike chemical stump removers that take months or years and saturate your soil with potassium nitrate, grinding is immediate. The stump is gone in 30 to 60 minutes. Unlike full root excavation that tears up half your yard with a backhoe, grinding targets only the stump itself and the major surface roots. Your lawn, irrigation system, and nearby plants stay intact.
We operate both full-size and compact stump grinders. The full-size unit handles massive hardwood stumps — oaks, hickories, and poplars up to 48 inches in diameter. The compact unit fits through 36-inch gates and works next to fences, foundations, and garden beds where the big machine cannot reach. Between the two, we can grind any stump on any Alpharetta property.
| Method | Time | Effectiveness |
|---|---|---|
| Professional Grinding | 30–60 min | ✅ Permanent |
| Chemical Removal | 6–12 months | ⚠ Partial |
| Burning | Hours/days | ❌ Dangerous, often illegal |
| Manual Digging | 4–8+ hours | ⚠ Back-breaking |
| Natural Decay | 3–10 years | ❌ Attracts pests |
| Excavator Removal | 1–2 hours | ✅ But destroys yard |
From utility marking to final grading, every step is handled so you get a clean result with zero hassle.
Before grinding, we verify underground utility locations to avoid gas, electric, water, and cable lines. We also ask about irrigation, septic lines, and invisible fencing near each stump location.
We grind every stump 6 to 12 inches below the surrounding soil level. Deep enough for sod, planting beds, or hardscape. For new tree planting, we go deeper — 18 to 24 inches — at your request.
Major surface roots that extend outward from the stump are ground down as well. We follow visible roots out to the edge of the work zone to ensure no above-ground root humps remain in your lawn.
We use the wood chips produced during grinding to backfill the hole, mix with topsoil, and grade the area level with the surrounding lawn. The spot settles naturally over a few weeks and is ready for seeding.
All excess chips are raked, scattered as mulch in nearby beds, or hauled away — your choice. We blow off all hardscapes and leave the work area clean and tidy.
Multiple stumps on the same property get volume pricing. Once the equipment is set up, additional stumps cost less per unit. We also offer bundle pricing when stump grinding is added to a tree removal job.
We carry both full-size grinders for massive hardwood stumps and compact units that fit through backyard gates. No stump is too big and no access point is too tight for our equipment lineup.
Stump grinding is one of the fastest services we offer. Most jobs are scheduled within 3 to 5 business days and completed in a single visit — often in under an hour per stump.
No hourly charges. No vague estimates. We quote a flat rate per stump based on diameter and accessibility. You know exactly what you will pay before we start — and that number does not change.
We lay plywood pathways to protect your lawn from equipment tracks. We cover nearby plants and garden beds. We blow off every hardscape when finished. Your yard looks better after we leave — not worse.
Having a tree removed? Add stump grinding at a discounted bundle rate. Since our crew is already on-site with the equipment, adding grinding to a removal job is the most cost-effective approach.
Stump grinding typically costs $100 to $400 per stump depending on diameter, wood hardness, and root spread. Most homeowners pay $150–$300 for a standard stump. Volume discounts available for multiple stumps.
We grind 6 to 12 inches below grade for lawn areas and up to 18–24 inches if you plan to replant a tree in the same spot.
Chips are used to backfill the hole and level the area. Extra chips can be spread as mulch or hauled away — your choice.
Yes. We operate compact grinders designed for tight access — next to fences, foundations, driveways, and retaining walls.
The stump itself will not grow back. Some hardwood species may send up sprout growth from remaining roots, but these die off over time. We can apply growth inhibitor if needed.
A single residential stump takes 30 to 60 minutes including setup and cleanup. Multiple stumps go faster since equipment is already on-site.
Grind it. Stumps attract termites and wood-boring insects, create tripping hazards, prevent mowing, and decrease curb appeal. Grinding is fast and eliminates all these issues.
Yes. We call 811 before every job to mark gas, electric, water, and cable lines. We also verify private utilities like irrigation and septic with the homeowner.
